Skip to content

Ptk Photo

Le guide passion, technique et connaissances

House

Tips and advice for successfully completing your home renovation projects

Renovating a home involves several trades, budget decisions, and a precise timeline. Before starting a renovation project, the question…

Homme en train d'enduire un mur lors de travaux de rénovation intérieure dans un salon en cours de transformation

Renovating a property involves several trades, budgetary decisions, and a precise timeline. Before starting a renovation project, the central question remains the order in which to incur expenses, as poor sequencing can negate the benefits of an entire line item. This article compares the work items based on their actual impact and highlights the cost discrepancies that often go unnoticed at the quotation stage.

Cost of renovation items: where does the budget really go

Competitors list planning stages. Few detail the actual budget distribution among the items. The table below summarizes the major items of a home renovation and their relative weight in the overall budget, based on the ranges commonly observed by construction professionals.

Work item Estimated share of total budget Risk of overspending
Insulation (walls, attics, floors) The highest share in an energy renovation High if moisture or asbestos is discovered
Joinery and windows Significant share Medium (custom-made is common in older buildings)
Heating and ventilation Intermediate share High if the network needs to be completely redone
Electricity and plumbing Intermediate share High in properties built before current standards
Finishes and coverings The lowest share proportionally Low if quantities are well calculated

Insulation absorbs the largest fraction of the budget in an energy renovation project. In comparison, finishes, which often motivate the project from the start, weigh the least. The gap between the most expensive item and the finishes surprises most homeowners at the time of the first detailed quote.

To delve deeper into each item and compare solutions, home renovations on Murmures Déco detail the common trade-offs between materials and techniques.

Woman installing wooden shelves in a kitchen undergoing renovation with a cordless drill

Insulation and ventilation: a duo that quotes wrongly separate

The most costly mistake in a renovation project is treating insulation without rethinking ventilation. Insulating an old property essentially means making it airtight. Without appropriate air renewal, moisture concentrates, mold appears, and indoor air quality deteriorates within months.

Insulation without appropriate ventilation generates more costly issues than the initial state. The regulatory energy audit distinguishes work paths that integrate ventilation from the design stage, whether it is a phased renovation or a complete renovation.

Check the consistency between the lots before signing

When insulation is entrusted to one contractor and the ventilation system to another, no one checks the compatibility of the two systems. An architect or project manager can ensure this coordination, but their cost must be included in the projected budget. In a condominium apartment, the issue becomes even more complicated because ventilation is often collective.

  • Ask each contractor how their lot interacts with the others (insulation, heating, ventilation) before validating the quotes.
  • Have an energy audit conducted in advance to identify losses and size the solutions coherently.
  • Allocate a budget item dedicated to ventilation from the start of the project, not at the end of the work.

DPE and financial aid: two unstable variables not to be fixed in the budget

Many homeowners calculate their renovation budget by counting on aid as a given. This is a frequent source of disappointment. The MaPrimeRénov’ pathway for large-scale renovations was temporarily suspended in 2025, while the pathway by gesture was not affected by this suspension. This distinction shows that a program can evolve between the time the file is prepared and when the work starts.

The principle of budgetary caution is simple: never include the amount of aid in the financing plan before the file is submitted and processed. The cash flow must be able to absorb the total cost of the work, with the aid coming as a later reimbursement.

The DPE ranking can change without work

The conversion coefficient for electricity used in the DPE has been changed as of January 1, 2026. Some properties may therefore see their ranking change without any renovation being carried out. Before deciding on a project based solely on an old energy label, it is essential to check if the diagnosis is still valid according to the current method.

This point is rarely mentioned in renovation guides. However, it can change the list of priority works and eligibility for aid.

Two people laying gray tiles on the floor in a bathroom undergoing complete renovation

Renovation quotes: the lines to compare between contractors

Comparing three quotes is advice repeated everywhere. The real difficulty is not obtaining three, but reading them on an identical basis. Two quotes may display a similar price while describing very different services.

  • Check if the quote includes the removal of the existing materials, the disposal of debris, and the preparation of the support, or if these items are charged extra.
  • Compare the referenced materials: brand, thickness of insulation, type of glazing, thermal resistance class. A generic quote without product references often masks inferior quality.
  • Check the mention of the ten-year guarantee and professional liability insurance, two elements that condition coverage in case of defects.
  • Look at the projected timeline: a contractor who does not commit to start and end dates makes the entire renovation schedule uncertain.

A detailed quote protects better than a cheaper but vague quote. The price per square meter only makes sense if the services described are identical from one contractor to another.

Materials: quality and availability

The choice of materials directly influences the durability of the work. An insulation material with low thermal resistance costs less to install but generates higher heating expenses over time. Standard double-glazed windows and triple-glazed ones do not offer the same performance, and the price difference between the two can be justified depending on the property’s exposure and climate zone.

Prioritizing the quality of materials over finishes remains the most cost-effective logic in the medium term. A well-insulated wall behind a simple paint job costs less to maintain than a poorly insulated wall behind a decorative coating.

The sequencing of work, the coherence between insulation and ventilation, caution regarding financial aid, and careful reading of quotes form the foundation of a controlled renovation. The actual budget of a project is determined by the details of the quote lines, not in the overall envelope initially announced.

Tips and advice for successfully completing your home renovation projects